Dell USC, Руководство пользователя

Страница: 70 / 132

70
USC and USC-LCE Operations
Summary and Confirmation
To view the summary of changes and apply them:
1 From iDRAC Configuration , select Summary .
View the summary of the changes you have made.
2 Click Confirm to apply the changes, or click Cancel to cancel all
changes and exit the iDRAC Configuration.
If you apply the changes, a
Please Wait
message appears while your
changes are saved. When the operation is complete, a final Confirmation
screen displays the changes that was applied successfully, left unchanged,
or failed.
3 Click Finish to save your settings and return to the main wizard.
Configuring RAID using Hardware RAID
If your system has one or more supported PERC RAID controller(s) with
PERC 6.1 firmware or greater, or SAS RAID controller(s), use the RAID
Configuration wizard to configure a virtual disk as the boot device.
Important
• USC can display only three storage controllers for RAID configuration on
the console.
• If there are any internal storage controller cards on the system, all other
external cards cannot be configured. If there are no internal cards present,
then external cards can be configured.
Workflow
To launch the RAID Configuration Wizard:
1 In the left pane, click Hardware Configuration .
2 In the right pane, click Configuration Wizards .
3 Click RAID Configuration to launch the wizard and do the following
tasks:
a
Creating a Secure Virtual Disk on Series 7 Controller
b
Select RAID Controller