Dell USC Скачать руководство пользователя страница 93

Страница: 93 / 132

USC and USC-LCE Operations

Supported Devices

You can update the part firmware and configuration for the following devices:

NOTE:

Only part firmware updates are supported on SAS cards and power supply

units.

• NICs (Broadcom)
• PERC, SAS, and CERC series 6 and 7
• Power Supply Units

Collect System Inventory on Restart

When you enable the

Collect System Inventory On Restart

property,

hardware inventory and part configuration information is discovered and

compared with previous system inventory information on every system

restart. To do this:

In the left pane, click

Platform Restore

Click

Part Replacement Configuration

Click either

Enabled

Disabled

from the

Collect System Inventory on

Restart

drop-down.

Part Firmware Update

From the part firmware update drop-down, select one of the following:

•

Disabled

— Firmware update on replaced parts is not performed.

•

Allow version upgrade only

— Firmware update on replaced parts is only

performed if the firmware version of the new part is lower than the existing

part.

•

Match firmware of replaced part

— Firmware on the new part is updated

to the version of the original part.

Содержание USC





































































































































Результаты поиска

Содержание USC

Отзывы:

Dell USC, Руководство пользователя, Страница: 93 / 132

Результаты поиска

Содержание USC

Отзывы: