Dell USC, Руководство пользователя

Страница: 21 / 132

Using USC or USC-LCE
21
Enabling USC or USC-LCE
1 Press <Ctrl><E> within five seconds after system start-up.
The
iDRAC6 Configuration Utility is displayed.
2 Navigate to System Services .
3 Select Disable System Services .
4 Save your changes and exit the iDRAC6 Configuration Utility . The
system reboots automatically.
Disabling USC or USC-LCE
To prevent the system from entering USC or USC_LCE during startup, do
the following:
1
Press <Ctrl><E> within five seconds after system start-up.
The
iDRAC6 Configuration Utility
is displayed.
2
Navigate to
System Services
.
3
Select
Disable System Services
.
4
Save your changes and exit the
iDRAC6 Configuration Utility
. The
system reboots automatically.
Canceling Request to Enter System Services
If USC or USC-LCE causes the system to repeatedly reboot, you can cancel
the request to enter System Services.
CAUTION:
This action cancels all tasks USC or USC-LCE is in the process of
executing. It is strongly recommended that you cancel the request to enter System
Services only when absolutely necessary.
1
Press <Ctrl><E> within five seconds after system start-up.
The
iDRAC6 Configuration Utility
page is displayed.
2
Navigate to System Services .
3
Select
Cancel System Services
.
4
Save your changes and exit the iDRAC6 Configuration Utility . The
system reboots automatically.