manualshive.com logo in svg

Dell USC, Руководство пользователя, Страница: 32 / 132

Поделиться
Скачать
Dell USC Скачать руководство пользователя страница 32

32

USC and USC-LCE Features

Platform Restore

Part Replacement Configuration

Use this feature to automatically update a new part to the firmware version or 

the configuration of the replaced part, or both.

See Also:

•

Part Replacement Configuration

Backup Server Profile

Use this feature to do the following and store the backup image files in the 

vFlash SD card:

• Back  up  the  following:

–

Hardware and firmware inventory such as BIOS, LOMs, USC 

supported add-in NIC cards, and Storage Controllers (RAID level, 

virtual disk, and controller attributes)

–

System information

–

Lifecycle Controller firmware images, data and configuration, and 

iDRAC firmware and configuration.

• Optionally secure the backup image file with a passphrase

Table 3-3.  RAID Configuration

RAID Controller Availability

Operations

• System does not have a RAID controller
• Bypass the optional RAID configuration

OS Deployment wizard installs the 

operating system to a default location, 

which is typically the disk identified as 

Disk 0 in the BIOS utility.

• System has a RAID controller and you 

selected the optional RAID configuration

Configure a virtual disk and select a 

virtual disk as the boot device.

Содержание USC





































































































































Отзывы:

Нет отзывов