Dell PowerEdge UPS 500T Скачать руководство пользователя страница 46

Страница: 46 / 134

Configuring the Software

Broadcasting a Message

NOTE:

Broadcasting is available only on the Microsoft Windows platform versions that include Messenger

Service. Messenger Service is not included with Windows Vista, Windows 7, and Windows Server 2008. Users

must have Messenger Service enabled on their computer to receive broadcast messages.

Select

Broadcast Setting

from the

Tools

menu or click

Setting

for Broadcast in the Event Action window.

The Broadcast Message Settings window opens (see Figure 47).

Figure 47. Broadcast Message Settings Window

The

Broadcast To

area of the window lists the users who can be selected to receive broadcast messages,

including all users, domain users, and specific users.

•

All Users

– Sends the message to all computers that are in the same network with the local Agent,

whether or not the computer is in the same domain.

•

Domain User

– Sends the message only to all computers in the same domain with the local Agent.

•

Specific User

– Sends the message only to one or a group of defined users, but no others.

Содержание PowerEdge UPS 500T







































































































































Результаты поиска

Содержание PowerEdge UPS 500T

Отзывы:

Похожие инструкции для PowerEdge UPS 500T

Бренды по названию

Популярные бренды

Dell PowerEdge UPS 500T, Руководство по установке и настройке

Результаты поиска

Содержание PowerEdge UPS 500T

Отзывы:

Похожие инструкции для PowerEdge UPS 500T

Бренды по названию

Популярные бренды