Dell PowerEdge T410, Руководство владельца оборудования

Страница: 114 / 204

114
Installing System Components
Expansion Cards
The system board can support up to four PCIe Generation 2 and one PCIe
Generation 1 cards. To identify the expansion slots, see Figure 6-1
.
Expansion Card Installation Guidelines
Observe the following notes and guidelines regarding the expansion-card
slots:
• The expansion-card slots are not hot-swappable.
• PCI Express Generation 2 and Generation 1 expansion cards are supported
in all slots.
• Slots 2 and 3 support full-length expansion cards; slots 1, 4, and 5 support
half-length expansion cards.
• The system supports up to two SAS or PERC expansion cards to manage
internal tape drives or external storage.
CAUTION:
To ensure proper cooling, no more than two of the five expansion
cards can have a power consumption of greater than 15 W (up to 25 W maximum
each), not including the integrated storage controller.
1. Maximum of 2 of any card whose maximum power exceeds 15W.
2. Refer to the expansion card documentation to ensure that the maximum power does not exceed
15W.
Table 3-3. Expansion-Card Installation Order
Card Priority Card Type Slot Priority Max Allowed 25-W Card
1 PERC 6/i controller 5,4 2 Y
2 SAS 6/iR controller 5,4 2 Y
3 SAS 5/iR controller 5,4 2 Y
4 PERC 6/E controller 5,4 2 Y
5 SAS 5/E controller 5,4 2 Y
6 All other Dell storage
cards 3,2,4,5,1 2 Y
7 Non-Dell storage cards 4,5,1,2,3 5
1
N
2
8 All other NICs 2,1,3,4 4
1
N
2
book.book Page 114 Tuesday, June 9, 2009 4:09 PM