Related Tasks
Removing the cooling shroud
Removing the (optional) dual riser module
Installing an expansion card into the dual riser module
Installing the (optional) dual riser module
Installing the cooling shroud
iDRAC ports card (optional)
The iDRAC ports card consists of the SD vFlash card slot and an iDRAC port. The iDRAC ports card is used
for advanced management of the system.
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the system. It
provides persistent on-demand local storage and a custom deployment environment that allows
automation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,
see the Integrated Dell Remote Access Controller User's Guide at
dell.com/esmmanuals
.
Removing the iDRAC ports card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
.
2.
Follow the procedure listed in
Before working inside your system
3.
If applicable, disconnect the cables from expansion card (s).
4.
Remove the expansion card riser.
NOTE: If applicable, close the expansion card latch on the cooling shroud to release the full
length card.
5.
Remove the cooling shroud.
6.
Keep the #2 Phillips screwdriver ready.
Steps
1.
Disconnect the management network cable from the iDRAC port.
2.
Loosen the two screws securing the iDRAC ports card holder to the system board.
3.
Pull the iDRAC ports card up and toward the front of the system to disengage it from the connector
and remove the card from the chassis.
93
Содержание PowerEdge R530xd
Страница 1: ...Dell PowerEdge R530xd Owner s Manual Regulatory Model E29S Series Regulatory Type E29S002 ...
Страница 163: ...163 ...
