Removing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
.
2.
Follow the procedure listed in
Before working inside your system
3.
If connected, disconnect the cables from expansion card (s).
NOTE: If required, close the expansion card latch on the cooling shroud to release the full
length card.
4.
If installed, remove the expansion card riser.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
Steps
By holding the sides of the cooling shroud, lift the cooling shroud away from the system.
Figure 13. Removing and installing the cooling shroud
1.
cooling shroud
2. cooling shroud alignment slots (2)
3. cooling shroud alignment pins (2)
Next steps
1.
Reinstall the cooling shroud.
2.
If removed, reinstall the optional PCIe expansion card riser.
3.
If disconnected, connect the cables to the expansion card(s).
4.
If required, open the expansion-card latch on the cooling shroud to support the full length
expansion card.
5.
Follow the procedure listed in
After working inside your system
.
49
Содержание PowerEdge R530xd
Страница 1: ...Dell PowerEdge R530xd Owner s Manual Regulatory Model E29S Series Regulatory Type E29S002 ...
Страница 163: ...163 ...
