Figure 17. Installing the memory module
1.
memory module
2. alignment key
3. memory module socket ejector (2)
When the memory module is properly seated in the socket, the levers on the memory module socket
align with the levers on the other sockets that have memory modules installed.
5.
Repeat steps 1 to 4 of this procedure to install the remaining memory modules.
Next steps
1.
If removed, reinstall the PCIe expansion card riser.
2.
Reinstall the cooling shroud.
3.
Follow the procedure listed in
After working inside your system
.
4.
Press <F2> to enter System Setup, and check the
System Memory
setting.
The system should have already changed the value to reflect the installed memory.
5.
If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat
steps 2 and 3 of Removing a memory module procedure, checking to ensure that the memory
modules are firmly seated in their sockets.
6.
Run the system memory test in the system diagnostics.
Related Tasks
Removing the (optional) dual riser module
Removing an expansion card from the dual riser module
Removing the cooling shroud
Installing an expansion card into the dual riser module
Installing the (optional) dual riser module
Installing the cooling shroud
61
Содержание PowerEdge R530xd
Страница 1: ...Dell PowerEdge R530xd Owner s Manual Regulatory Model E29S Series Regulatory Type E29S002 ...
Страница 163: ...163 ...
