B-8
Dell PowerEdge 2300 Systems Installation and Troubleshooting Guide
)LJXUH%[1RQ+RW3OXJJDEOH6&6,%DFNSODQH%RDUG
Table B-5 lists the connectors on the 2 x 3 non-hot-pluggable SCSI backplane board.
'LVDEOLQJD)RUJRWWHQ3DVVZRUG
The computer’s software security features include a supervisor password and a user
password, which are discussed in detail in Chapter 4, “Using the System Setup Pro-
gram,” of the
Dell PowerEdge 2300 Systems User’s Guide. A password jumper on the
system board enables these password features or disables them and clears any pass-
word(s) currently in use.
To disable a forgotten supervisor password or user password, perform the following
steps:
5HPRYHWKHULJKWVLGHFRPSXWHUFRYHU
See “Removing the Computer Covers” in Chapter 7 for instructions.
7DEOH%[1RQ+RW3OXJJDEOH6&6,%DFNSODQH%RDUG
&RQQHFWRUV
&RQQHFWRU
'HVFULSWLRQ
POWER
Power input connector
SCSIA
Ultra2/LVD SCSI cable connector for SLOT0 through SLOT2
(dual-channel mode) or SLOT0 through SLOT5 (single-
channel mode)
SCSIB
Ultra2/LVD SCSI cable connector for SLOT3 through SLOT5
(dual-channel mode)
SLOT
n
SCA-2–compatible SCSI hard-disk drive connector
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and
acronym list that precedes the Index.
Ultra2/LVD SCSI
cable connector (SCSIA)
power input
connector (POWER)
SCA-2
–
compatible SCSI
connectors on reverse side
(SLOT0 through SLOT5)
Ultra2/LVD SCSI
cable connector (SCSIB)
32268BK0.BK : 32268AB0.FM Page 8 Monday, March 16, 1998 8:56 AM