10-8
Dell PowerEdge 2300 Systems Installation and Troubleshooting Guide
,QVWDOOLQJD'HOO3RZHU(GJH([SDQGDEOH5$,'
&RQRVW$GDSWHU&DUG
Use the following procedure to install a Dell PowerEdge Expandable RAID Controller
host adapter card.
&$87,216HH´3URWHFWLQJ$JDLQVW(OHFWURVWDWLF'LVFKDUJHµLQWKHVDIHW\
LQVWUXFWLRQVDWWKHIURQWRIWKLVJXLGH
8QSDFNWKHKRVWDGDSWHUFDUGDQGSUHSDUHLWIRULQVWDOODWLRQ
Refer to the documentation accompanying the host adapter card.
5HPRYHWKHULJKWVLGHFRPSXWHUFRYHU
See “Removing the Computer Covers” in Chapter 7.
5HPRYHWKH8OWUD/9'6&6,FDEOHIURPWKHFRPSXWHU
Detach one end of the cable from the SCSI host adapter connector labeled
“SCSI1” on the system board.
Detach the other end of the cable from the connector labeled “SCSIA” on the
SCSI backplane board.
,QVWDOOWKHKRVWDGDSWHUFDUGLQ3HULSKHUDO&RPSRQHQW,QWHUFRQQHFW
3&,H[SDQVLRQVORW3&,RU3&,
See “Installing an Expansion Card” in Chapter 8.
If you are installing one or more SCSI host adapter cards, the boot order is influ-
enced by the particular expansion slot in which the card is installed. In
descending order, the system boot order is as follows: CD-ROM, diskette, PCI1,
PCI2, PCI3, PCI4, PCI5, PCI6, and on-board SCSI host adapter (internal drives).
&RQQHFWWKH8OWUD/9'6&6,FDEOHSURYLGHGLQWKHKRVWDGDSWHUFDUG
NLWWRWKHFRQQHFWRUODEHOHG´6&6,$µRQWKH6&6,EDFNSODQHERDUGVHH
)LJXUH
32268BK0.BK : 32268100.FM Page 8 Monday, March 16, 1998 8:56 AM