7-24
Dell PowerEdge 2300 Systems Installation and Troubleshooting Guide
9HULI\WKDWWKH6&6,GHYLFHGULYHUVDUHLQVWDOOHGDQGFRQILJXUHG
FRUUHFWO\
See Chapter 3, “Installing and Configuring SCSI Drivers,” in the
Dell PowerEdge
2300 Systems User’s Guide to determine which drivers are required and how they
should be installed and configured.
Are the required SCSI device drivers installed and configured correctly?
Yes.
Go to step 5.
No.
Go to step 4.
5HLQVWDOODQGRUUHFRQILJXUHWKHUHTXLUHG6&6,GHYLFHGULYHUV7KHQ
UHERRWWKHV\VWHP
Is the problem resolved?
Yes.
You have fixed the problem.
No.
Go to step 5.
5HPRYHWKHGULYHFDUULHUDQGLQVWDOOLWLQDQRWKHUGULYHED\
Is the problem resolved?
Yes.
The SCSI backplane board has a defective connector. See Chapter 11, “Get-
ting Help,” for instructions on obtaining technical assistance.
No.
Go to step 6.
5HPRYHWKHULJKWVLGHFRPSXWHUFRYHU
See “Removing the Computer Covers” found earlier in this chapter.
&$87,216HH´3URWHFWLQJ$JDLQVW(OHFWURVWDWLF'LVFKDUJHµLQWKHVDIHW\
LQVWUXFWLRQVDWWKHIURQWRIWKLVJXLGH
&KHFNWKH6&6,FDEOHFRQQHFWLRQVWRWKH6&6,EDFNSODQHERDUGDQGWR
WKH6&6,KRVWDGDSWHU&KHFNWKH'&SRZHUFDEOHFRQQHFWLRQWRWKH6&6,
EDFNSODQHERDUG
The SCSI cable may be connected to the SCSI host adapter on the system board,
or to a SCSI host adapter card in an expansion slot. See Chapter 10, “Installing
Hard-Disk Drives,” for the location of the cable connectors on the SCSI backplane
board and the SCSI host adapter.
Are the cables firmly connected?
Yes.
Go to step 9.
No.
Go to step 8.
32268BK0.BK : 32268C70.FM Page 24 Monday, March 16, 1998 8:56 AM