Dell OptiPlex SX270 Скачать руководство пользователя страница 94

Страница: 94 / 102

No sound from headphones

System Board Problems

Fill out the

Diagnostics Checklist

as you complete the following checks.

Video and Monitor Problems

Fill out the

Diagnostics Checklist

as you complete these checks.

If the screen is blank

If the screen is difficult to read

Check for interrupt request conflicts

—

See "

Resolving Software and Hardware Incompatibilities

Check the headphone cable connection

—

Ensure that the headphone cable is securely inserted into the headphone connector.

Adjust the Windows volume control

—

Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume

is turned up and that the sound is not muted.

Perform all checks in "

Keyboard Problems

CAUTION:

Before you begin any of the procedures in this section, follow the steps in "

CAUTION: Safety Instructions

Reinstall the battery

—

Turn off the computer and devices, disconnect them from their electrical outlets, wait 10 to 20 seconds, and then open the computer

cover.

Remove the battery, wait 5 minutes, and then reinstall the battery.

Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

If the problem still exists,

contact Dell

CAUTION:

Before you begin any of the procedures in this section, follow the steps in "

CAUTION: Safety Instructions

Replace the Memory Modules

—

Turn off the computer and devices, disconnect them from their electrical outlets, wait 10 to 20 seconds, and then open the computer

cover.

Rotate the power supply away from the system board.

Replace the memory module(s).

Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

If the RAM count displayed does not correctly match the actual amount of memory installed in the computer,

contact Dell

NOTE:

See the monitor documentation for troubleshooting procedures.

Check the monitor power light

—

If the power light is off, firmly press the button to ensure that the monitor is turned on. If the power light

is lit or blinking, the monitor has power. If the power light is blinking, press a key on the keyboard or move the mouse.

Check the monitor cable connection

—

Check the connector for bent or broken pins. (It is normal for monitor cable connectors to have

missing pins.)

Check the RGB/DVI video input switch found on some Digital Flat Panel displays

—

Check that the desired video input is selected.

Test the electrical outlet

—

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Swap the power cables

—

Swap the computer and monitor power cables to determine if the power cable is defective.

Test the video extension cable (if used)

—

If you are using a video extension cable and removing the cable solves the problem, the cable is

defective.

Test another monitor

—

If another monitor is available, connect it to the computer.

Check the diagnostic lights

—

See "

Diagnostic Lights

Run the

Dell Diagnostics

—

If any tests fail,

contact Dell

Содержание OptiPlex SX270







































































































Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды

Dell OptiPlex SX270, Руководство пользователя

Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды