Dell OptiPlex SX270 Скачать руководство пользователя страница 18

Страница: 18 / 102

Using the four #6 wood screws (0.625 inch; 15.88 mm) provided, attach the mounting plate to a solid surface with a minimum thickness of 1 inch (2.5

cm).

Orient the computer and stand under the mounting plate approximately 1 inch (2.5 cm) from the edge of the mounting plate.

Lift the computer and stand, insert the stand into the mounting bracket, and slide the stand until the release lever tab is inserted through the slot in

the mounting plate.

Attach the cable cover (if used).

Removing the Computer From the Mounting Plate

Firmly hold the computer and press the release lever tab until the tab is freed from the slot on the mounting plate.

release lever tab

mounting plate slot

screw holes (4)

solid surface with a 1-inch (2.5 cm) minimum thickness

CAUTION:

Attach the mounting plate to a solid surface capable of supporting 40 lbs (18.1 kg) hanging weight.

mounting plate slot

release lever tab

CAUTION:

To avoid personal injury, remove the mounting plate if you are permanently removing the computer.

Содержание OptiPlex SX270







































































































Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды

Dell OptiPlex SX270, Руководство пользователя

Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды