background image

Dropped or Damaged Computer 

 

 

 

 

E-Mail, Modem, and Internet Problems 

 

 

Error Messages 

 

If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared. 

 

 

 

CAUTION: 

Before you begin any of the procedures in this section, follow the steps in "

CAUTION: Safety Instructions

."

Check the card and cable connections 

 

 

1.

 

Turn off the computer and devices, disconnect them from their electrical outlets, wait 10 to 20 seconds, and then open the computer 

cover.  

2.

 

Check all card connections in the computer, and reseat any loose cards.  

3.

 

Ensure that all cables are properly connected and that all components are properly seated in their connectors and sockets.  

4.

 

Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.  

5.

 

Run the 

Dell Diagnostics

. If any of the diagnostics tests fail, 

contact Dell

.  

Check the telephone line connection 

 

Verify that the telephone line is connected to the jack on the modem. (The jack has either a green 

label or a connector-shaped icon next to it.) Ensure that you hear a click when you insert the telephone line connector into the modem.  

Check the telephone jack 

 

Disconnect the telephone line from the modem and connect it to a telephone. Listen for a dial tone.  

Connect the modem directly to the telephone wall jack 

 

If you have other telephone devices sharing the line, such as an answering 

machine, fax machine, surge protector, or line splitter, then bypass them and use the telephone to connect the modem directly to the 
telephone wall jack.  

Use a different telephone line 

 

If you are using a line that is 3 m (10 ft.) or more in length, try a shorter one. 

 

Run the Modem Helper diagnostics 

 

Click the 

Start

 button, point to 

All

 

Programs

, and then click 

Modem Helper

. Follow the instructions on 

the screen to identify and resolve modem problems. (Modem Helper is not available on all computers.)  

Verify that the modem is communicating with Windows

® —

 

 

1.

 

Click the 

Start

 button and click 

Control Panel

.  

2.

 

Click 

Printers and Other Hardware

.  

3.

 

Click 

Phone and Modem Options

.  

4.

 

Click the 

Modems

 tab.  

5.

 

Click the COM port for your modem.  

6.

 

Click 

Properties

, click the 

Diagnostics

 tab, and then click 

Query Modem

 to verify that the modem is communicating with Windows.  

 

If all commands receive responses, the modem is operating properly. 

Turn off call waiting (catch-phone) 

 

See your telephone directory for instructions on deactivating this feature. Then adjust the dial-up 

networking connection properties.  

1.

 

Click the 

Start

 button and click 

Control Panel

.  

2.

 

Click 

Printers and Other Hardware

, and then click 

Phone and Modem Options

.  

3.

 

Click your connection type to highlight it.  

4.

 

Click the 

Dialing Rules

 tab and click 

Edit

.  

5.

 

Click the 

To Disable Call Waiting

 box to place a check mark in it.  

6.

 

Select the disable code from the drop-down menu (for example, *70).  

7.

 

Click 

Apply

 and click 

OK

.  

Ensure that you are connected to the Internet 

 

With the Outlook Express e-mail program open, click 

File

. If 

Work Offline

 has a check 

mark next to it, click the checkmark to remove it and connect to the Internet.  

Ensure that you have subscribed to an Internet service provider 

 

Contact an Internet service provider to subscribe.  

Contact your Internet service provider 

 

Contact your Internet service provider for assistance.  

A filename cannot contain any of the following characters: \ / : * ? " < > | 

 

Do not use these characters in filenames.  

A required .DLL file was not found 

 

The program that you are trying to open is missing an essential file. To remove and then reinstall the 

program:  

1.

 

Click the 

Start

 button and click 

Control Panel

.  

2.

 

Click 

Add or Remove Programs

.  

3.

 

Select the program you want to remove.  

4.

 

Click the 

Change or Remove Program

 icon.  

5.

 

See the program documentation for installation instructions.  

Alert! Previous attempts at booting this system have failed at checkpoint [

nnnn 

]. For help in resolving this problem, please note this 

checkpoint and contact Dell Technical Support 

 

The computer failed to complete the boot routine three consecutive times for the same 

error. 

Contact Dell

 and report the checkpoint code (

nnnn

) to the support technician.  

Attachment failed to respond 

 

The floppy or hard drive controller cannot send data to the associated drive. See "

Floppy drive problems

" or 

Содержание OptiPlex SX270







































































































Отзывы: