Dell OptiPlex SX270 Скачать руководство пользователя страница 28

Страница: 28 / 102

Enter system setup

and verify that

Password Status

is set to

Unlocked

Highlight

System

Password

, and then press the left- or right-arrow key.

The option heading changes to

Enter

Password

, followed by an empty 32-character field in square brackets.

Type your new system password.

You can use up to 32 characters. To erase a character when entering your password, press <Backspace> or the left-arrow key. The password is not

case sensitive.

Certain key combinations are not valid. If you enter one of these combinations, the speaker emits a beep.

As you press each character key (or the spacebar for a blank space), a placeholder appears in the field.

Press <Enter>.

If the new system password is less than 32 characters, the whole field fills with placeholders. Then the option heading changes to

Verify Password

followed by another empty 32-character field in square brackets.

To confirm your password, type it a second time and press <Enter>.

The password setting changes to

Enabled

Exit system setup.

Password protection takes effect when you restart the computer.

Typing Your System Password

When you start or restart your computer, one of the following prompts appears on the screen.

Password Status

is set to

Unlocked

Type in the password and

- press <ENTER> to leave password security enabled.

- press <CTRL><ENTER> to disable password security.

Enter password:

Password

Status

is set to

Locked

Type the password and press <Enter>.

If you have assigned a setup password, the computer accepts your setup password as an alternate system password.

If you type a wrong or incomplete system password, the following message appears on the screen:

** Incorrect password. **

If you again type an incorrect or incomplete system password, the same message appears on the screen. The third and subsequent times you type an

incorrect or incomplete system password, the computer displays the following message:

** Incorrect password. **

Number of unsuccessful password attempts: 3

System halted! Must power down.

Even after your computer is turned off and on, the previous message is displayed each time you type an incorrect or incomplete system password.

Deleting or Changing an Existing System Password

Enter system setup

and verify that

Password Status

is set to

Unlocked

Restart your computer.

When prompted, type the system password.

Press <Ctrl><Enter> to disable the existing system password.

Confirm that

Not Enabled

is displayed for the

System Password

option.

Not Enabled

is displayed, the system password is deleted. If

Not Enabled

is not displayed, press <Alt><b> to restart the computer, and then repeat

step 3

through

step 5

To assign a new password, follow the procedure in "

Assigning a System Password

NOTE:

You can use

Password Status

in conjunction with

System Password

and

Setup Password

to further protect your computer from unauthorized

changes.

Содержание OptiPlex SX270







































































































Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды

Dell OptiPlex SX270, Руководство пользователя

Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды