Dell OptiPlex SX270 Скачать руководство пользователя страница 70

Страница: 70 / 102

15.

Slide the drive into the drive bay and lower the hard-drive door to lock into place.

16.

Replace the cable cover (if used).

17.

Attach the computer to the mounting plate (if used).

18.

Connect your computer to the power adapter and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

19.

Reboot the computer.

20.

Partition and logically format your drive before you proceed to the next step.

For instructions, see the documentation that came with your operating system.

21.

Test the hard drive by running the

Dell Diagnostics

22.

Install your operating system on the hard drive.

For instructions, see the documentation that came with your operating system.

After you replace the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer

start-up:

ALERT! Cover was previously removed.

23.

Reset the chassis intrusion detector

by changing

Chassis Intrusion

Enabled

Enabled-Silent

Back to Contents Page

drive connector

drive cable

NOTICE:

To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer.

NOTE:

If a setup password has been assigned by someone else, contact your network administrator for information on resetting the chassis

intrusion detector.

Содержание OptiPlex SX270







































































































Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды

Dell OptiPlex SX270, Руководство пользователя

Результаты поиска

Содержание OptiPlex SX270

Отзывы:

Похожие инструкции для OptiPlex SX270

Бренды по названию

Популярные бренды