·
Do not plug the equipment power cables into an electrical outlet if the power cable is damaged.
·
To prevent electric shock, plug the equipment power cables into properly grounded electrical outlets.
·
If the equipment is provided with a 3-prong power cable, do not use adapter plugs that bypass the grounding feature,
or remove the grounding feature from the plug or adapter.
·
Norway and Sweden: If this product is provided with a 3-prong power cable, connect the power cable to a grounded
electrical outlet only.
·
If you use an extension power cable, ensure that the total ampere rating of the products plugged in to the extension
power cable does not exceed the ampere rating of the extension cable.
·
If you must use an extension cable or power strip, ensure the extension cable or power strip is connected to a wall
power outlet and not to another extension cable or power strip. The extension cable or power strip must be designed
for grounded plugs and plugged into a grounded wall outlet.
·
If you are using a multiple-outlet power strip, use caution when plugging the power cable into the power strip. Some
power strips may allow you to insert the plug incorrectly. Incorrect insertion of the power plug could result in
permanent damage to your equipment, as well as risk of electric shock and/or fire. Ensure that the ground prong of
the power plug is inserted into the mating ground contact of the power strip.
·
Be sure to grasp the plug, not the cable, when disconnecting equipment from an electric socket.
When using the AC adapter:
·
Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire
or explosion.
·
Place the AC adapter in a ventilated area, such as a desk top or on the floor, when you use it to run the computer or
to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not
use the AC adapter inside a carrying case.
·
The AC adapter may become hot during normal operation of your computer. Use care when handling the adapter
during or immediately after operation.
·
It is recommended that you lay the adapter on the floor or desk so that the green light is visible. This will alert you if
the adapter should accidentally go off due to external effects. If for any reason the green light goes off, disconnect
the AC cord from the wall for a period of ten seconds, and then re-connect the power cord.
·
Japan Only: Use on the Dell provided AC power cable with the AC adapter. Use of any other power cable may damage
the device or AC adapter or may present a risk of fire or electric shock.
CAUTION: When preparing your AC adapter for travel, wrap both of the cords
around the adapter in the same direction as shown in the following picture.
Failure to wrap the cords in the correct direction can result in damage to the cords
not covered by the adapter warranty. Never use an AC adapter that shows signs
of damage or excessive wear.
Connecting the AC Plug Adapter (Japan Only)
CAUTION:
When using the AC plug adapter, do no permit contact between the green ground wire and
power leads because electrical shock, fire, or damage to your computer can occur.
NOTE: Some devices available in Japan do not include the AC plug adapter
1.
Connect the metal ground connector to the grounding source on the outlet.
