1
Handle cover
2
Stylus clip
3
Screw
Figure 14 14 Close Up View of Installed Stylus Clip
To replace the stylus clip:
1.
Remove the screw on the end of the handle cover that secures the stylus clip. Note that the stylus clip can be
installed on the end of either handle cover.
2.
Remove the old stylus clip.
3.
Place the new stylus clip between the handle cover and the screw.
4.
Install and tighten the screw, ensuring the screw head secures the stylus clip in place.
14.10.2
Replacing a Stylus
Figure 14 15 Stylus and Tether
1
Stylus
2
Stylus tether (with loops on each end)
To replace the stylus:
1.
Remove the tether and stylus from the stylus clip:
a.
At the stylus clip, loosen the looped end of the tether.
b.
Pull the stylus and tether through the loop until the tether is free from the stylus clip.