dynabook Satellite C50-K, Руководство пользователя

Страница: 1 / 46

November 1
th
, 2022
Dynabook Laptop Components Classified as Requiring Selective Treatment
Dynabook would like to communicate the method of identifying and removing components contained
in Dynabook notebook products, including but not limited to the
Satellite C50-K model, that requires
selective treatment based on the European WEEE Directive, Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and electronic equipment (WEEE).
All of the instructions provided within this letter can be reviewed in greater detail within
the
Satellite C50-K Series Maintenance Manual.
Tools Required
In order to remove internal components of the Satellite C50-K some tools from the list below may
be required located in Chapter 4 Replacement Procedures of the Dynabook Maintenance
Manua l.
For your safety and that of other people in the working environment, it is strongly recommended
that you use electrostatic discharge (ESD) equipment. The proper use of this equipment will
ensure successful repair work and reduce the costs for repairing damaged components.
The equipment and tools required for disassembly and reassembly are:
■
One 2 mm Phillips screwdriver
■
One 4 mm flat-blade screwdriver
■
Torx screw driver
■
Tweezers (for pulling out screws)
■
ESD mats (for the floor and work desks)
■
An ESD wrist strap or heel grounder
■
Anti-static carpets or flooring
■
Air ionizers (for highly electrostatic sensitive areas)
■
A plastic card (in credit card size)
■
A smooth stick (0.43mm, for example: a Pick or PC Mylar)
■
SIM card tray eject pin tool
Table of Contents
(Page 2-3) Removing the Lithium Ion Battery (Main Battery, No coin cell battery)
(Page 4) Removing the SSD
(Page 5-44) Removing LCD, Printed Circuit / Wiring Boards (PCB/ PWB system board)
(Page 45-46) AC Adapter, External cables provided with the AC adapter and USB cable