Dell Alienware Aurora R4 Скачать руководство пользователя страница 25

Страница: 25 / 162

Left Side-Panel

Left Side-Panel

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

CAUTION:

Ensure that sufficient space exists to support the computer with the

computer cover removed—at least 30 cm (1 ft.) of desk top space.

Removing the Left Side-Panel

NOTE:

Ensure that you remove the security cable from the security cable slot (if

applicable).

Slide the security-cable slot latch to the unlocked position.

Lift the release panel to open the left side-panel.

Pull and lift the left side-panel away from the chassis.

NOTE:

Theater lighting (available only in ALX chassis) turns on automatically when

the left side-panel is removed.

book.book Page 25 Wednesday, May 16, 2012 2:37 PM

Содержание Alienware Aurora R4



































































































































































Результаты поиска

Содержание Alienware Aurora R4

Отзывы:

Похожие инструкции для Alienware Aurora R4

Бренды по названию

Популярные бренды

Dell Alienware Aurora R4, Руководство пользователя

Результаты поиска

Содержание Alienware Aurora R4

Отзывы:

Похожие инструкции для Alienware Aurora R4

Бренды по названию

Популярные бренды