manualshive.com logo in svg

Dell EMC PowerEdge R940xa, Инструкция по установке и обслуживанию, Страница: 49 / 177

Поделиться
Скачать
Dell EMC PowerEdge R940xa Скачать руководство пользователя страница 49

Removing a drive carrier

Prerequisites

1. Follow the safety guidelines listed in 

Safety instructions

.

2. Follow the procedure listed in 

Before working inside your system

.

3. Using the management software, prepare the drive for removal.

If the drive is online, the green activity or fault indicator flashes while the drive is turning off. When the drive indicators are off, the 
drive is ready for removal. For more information, see the documentation for the storage controller.

CAUTION: 

Before attempting to remove or install a drive while the system is running, see the documentation for the 

storage controller card to ensure that the host adapter is configured correctly to support drive removal and 
insertion.

CAUTION: 

Mixing drives from previous generations of PowerEdge servers is not supported.

CAUTION: 

To prevent data loss, ensure that your operating system supports drive installation. See the 

documentation supplied with your operating system.

4.

Remove the front bezel

.

Steps

1. Press the release button to open the drive carrier release handle.
2. Holding the handle, slide the drive carrier out of the drive slot.

Figure 23. Removing a drive carrier

Next steps

1.

Replace the drive carrier or drive blank

.

Installing the drive carrier

Prerequisites

CAUTION: 

Before removing or installing a drive while the system is running, see the documentation for the storage 

controller card to ensure that the host adapter is configured correctly to support drive removal and insertion.

CAUTION: 

Combining SAS and SATA drives in the same RAID volume is not supported.

Installing and removing system components

49

Содержание PowerEdge R940xa


















































































































































































Отзывы:

Нет отзывов