Dell EMC PowerEdge R940xa, Инструкция по установке и обслуживанию, Страница: 35 / 177

Slot Bifurcation
About this task
The Slot Bifurcation screen details are explained as follows:
Slot Bifurcation Allows Platform Default Bifurcation , Auto discovery of Bifurcation and Manual bifurcation Control . The
default is set to Platform Default Bifurcation . The slot bifurcation field is accessible when set to Manual
bifurcation Control and is grayed out when set to Platform Default Bifurcation or Auto discovery of
Bifurcation .
Table 6. Slot Bifurcation
Option x16 PCIe riser 1 and 2 configuration x8 PCIe riser 1 and 2
configuration
Auto Discovery
Bifurcation Settings
Platform Default Bifurcation,
Auto Bifurcation,
Manual bifurcation Platform Default Bifurcation,
Auto Bifurcation,
Manual bifurcation
Slot 1 Bifurcation NA x4 or x8 Bifurcation
Slot 2 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 Bifurcation
Slot 3 Bifurcation NA x4 or x8 Bifurcation
Slot 4 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 Bifurcation
Slot 5 Bifurcation x4 or x8 Bifurcation x4 or x8 Bifurcation
Slot 6 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8,
x4,x4 Bifurcation
Slot 7 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8,
x4,x4 Bifurcation
Slot 8 Bifurcation NA x4 or x8 Bifurcation
Slot 9 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 Bifurcation
Slot 10 Bifurcation NA x4 or x8 Bifurcation
Slot 11 Bifurcation x4 or x8 or x16, or x4, x4, x8, or x8, x4,x4
Bifurcation x4 or x8 Bifurcation
Slot 12 Bifurcation x4 or x8 Bifurcation x4 or x8 Bifurcation
Serial Communication
Use the Serial Communication screen to view the properties of the serial communication port.
Viewing Serial Communication
To view the Serial Communication screen, perform the following steps:
Steps
1. Power on or restart the system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS .
4. On the System BIOS screen, click Serial Communication .
Pre-operating system management applications 35