manualshive.com logo in svg

Dell EMC PowerEdge R940xa, Инструкция по установке и обслуживанию, Страница: 47 / 177

Поделиться
Скачать
Dell EMC PowerEdge R940xa Скачать руководство пользователя страница 47

Figure 20. Installing the optional front bezel with the LCD panel

Drives

Drives are supplied in hot swappable drive carriers that fit in the drive slots.

CAUTION: 

Before attempting to remove or install a drive while the system is running, see the documentation for the 

storage controller card to ensure that the host adapter is configured correctly.

CAUTION: 

Do not turn off or restart your system while a drive is being formatted. Doing so can cause a drive failure.

When you format a drive, allow enough time for the formatting to complete. Be aware that high-capacity drives can take a long time to 
format.

Drives

The PowerEdge R940xa system supports SAS, SATA, Nearline SAS hard drives/SSDs, or NVMe drives.

The supported drive and SSD options for the PowerEdge R940xa system are:

•

8 drives system

 - Up to eight 2.5 inch (SAS, SATA or Nearline SAS) front accessible drives in slots 0 through 7.

•

32 drives system

 - Up to 24 2.5 inch (SAS, SATA or Nearline SAS) including 4 NVMe front accessible drives in slots 0 to 23 of upper 

drives bay, and up to eight 2.5 inch (SAS, SATA or Nearline SAS) front accessible drives in slots 24 to 31 of lower drives bay.

Removing a drive blank

Prerequisites

1. Follow the safety guidelines listed in 

Safety instructions

.

2.

Remove the Front bezel

, if installed.

3.

Remove the front bezel

.

CAUTION: 

To maintain proper system cooling, drive blanks must be installed in all empty drive slots.

Installing and removing system components

47

Содержание PowerEdge R940xa


















































































































































































Отзывы:

Нет отзывов