Dell EMC E46S001, Инструкция по установке и обслуживанию, Страница: 113 / 184

Expansion cards and expansion card risers
Expansion card installation guidelines
The following table describes the supported expansion cards:
Table 46. Expansion card riser configurations
Expansion card riser PCIe slots on the riser Processor connection Height Length Slot width
Full height right riser Slot 2 Processor 1 Full Height Half Length x16
Low profile right riser Slot 2 Processor 1 Low Profile Half Length x16
Low profile left riser Slot 3 Processor 2 Low Profile Half Length x16
Butterfly riser Slot 2 Processor 1 Full Height Half Length x16
Butterfly riser Slot 3 Processor 1 Low Profile Half Length x8
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with
the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be installed in the card
priority and slot priority order.
Table 47. Riser configurations: No RSR - 1 CPU
Card Type Slot Priority Maximum number of cards
LOM riser ; 2x1G BCM5720L (FXN) 1 1
LOM riser ; 2x10G BCM57416 (BASeT/SFP
+) (FXN) 1 1
PCIe SSD PCIe Card (Samsung) 5 1
Card,Network (Broadcom/INTEL/Mellanox/
Solarflare) 5 1
Card,Controller (EMULEX/QLOGIC/) 5 1
Intel OPA NIC (Intel OPA) 5 1
BOSS M.2 (SATA) (Dell) 5 1
Card,Network (Broadcom/INTEL) 6, 5 2
PERC9.14G/PERC10 (FXN) Integrated Slot 1
RAID - PERC9.14G/PERC10 (Internal) (Dell) Integrated Slot 1
Table 48. Riser configurations: No RSR - 2 CPU
Card type Slot priority Maximum number of cards
LOM riser ; 2x1G BCM5720L (FXN) 1 1
LOM riser ; 2x10G BCM57416 (BASeT/SFP
+) (FXN) 1 1
Installing and removing system components 113