Dell EMC E46S001, Инструкция по установке и обслуживанию

Страница: 111 / 184

Figure 63. Installing the heat sink onto the processor
Next steps
1 Installing a processor and heat sink module
2 Installing the air shroud
3 Follow the procedure listed in After working inside your system .
Installing a processor and heat sink module
Prerequisites
CAUTION: Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1 Follow the safety guidelines listed in Safety instructions .
2 If installed, remove the CPU dust cover.
Steps
1 Align the pin 1 indicator of the heat sink to the system board and then place the processor and heat sink module (PHM) on the
processor socket.
CAUTION: To avoid damaging the fins on the heat sink, do not press down on the heat sink
fins.
Installing and removing system components 111