Deliberant FWBD0501 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 67

background image

deliberant

Page

2

Copyright

© 2012 Deliberant

This user’s guide and the software described in it are copyrighted with all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form by any means without the written permission of Deliberant.

Notice

Deliberant reserves the right to change specifications without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an
assurance of product characteristics. Deliberant shall be liable only to the degree specified in the
terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and
the use of its contents is subject to written authorization from Deliberant.

Trademarks

Deliberant logo is trademark of Deliberant LLC.

All other registered and unregistered trademarks in this document are the sole property of their
respective owners.

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance
100cm between the radiator& your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

«
1
2
3
4
...
»

Содержание FWBD0501




































































Отзывы:

Нет отзывов

Похожие инструкции для FWBD0501

LTE Mobile HotSpot PRO

Бренд: Samsung Страницы: 77

Бренд: macaroon Страницы: 13

Бренд: Ocens Страницы: 2

Бренд: Cambium Networks Страницы: 3

Бренд: Cambium Networks Страницы: 68

Бренд: Ubiquiti Страницы: 16

Бренд: i. Tech Dynamic Страницы: 8

Бренд: Mustek Страницы: 67

3CRWEASYG73 - 11g Wireless LAN Outdoor

Бренд: 3Com Страницы: 4

B-Link B-LINK-MIFI

Бренд: Brickhouse Security Страницы: 8

C2000-A2-SMD4240-AC5

Бренд: KonNad Страницы: 12

Бренд: Linksys Страницы: 69

Бренд: Linksys Страницы: 140

Бренд: Huawei Страницы: 2

Бренд: Huawei Страницы: 52

Бренд: Huawei Страницы: 57

Бренд: Huawei Страницы: 20

Бренд: Huawei Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды