Datex-Ohmeda Aestiva 7900 SmartVent, Техническое справочное руководство

Страница: 80 / 204

4a Tests and Calibration 4.X Software
4a-34 05/04 1006-0453-000
4a.3.24 Service
Calibrations Required
The Schedule Service Calibrations menu lists which setting or calibration
must be performed when the “Service Calibration w ” alarm appears in
normal operation. After the setting or calibration is properly completed, the
text for that setting or calibration is removed from the list.
Figure 4-36 • Service Calibrations Required menu
The normal operation “Service Calibration w ” alarm message is only removed
when all the required settings or calibrations are completed.
Remarks
The Set Service Calibration menu item is used by the factory to activate the
Service Calibration alarm and require that all settings and calibrations be
performed when the Aestiva machine is set up for operation at its permanent
location.
There is no need to set the “Service Calibration
w
” alarm in the field.
Select “No” when the following warning appears if you selected the
“Set Service Cal” menu item.
Figure 4-37 • Set Service Calibration menu
If you select “Yes” you will see the screen displayed in Figure 4-38. Follow the
directions on the screen to complete the calibrations.