I P - D S U U s e r ’ s M a n u a l
02/02/08
16
3.5 Console
Installation/Configuration
The
IP-DSU
is managed through its console port by a terminal, PC, dial-up modem, or
BNS asynchronous connection (see next figure).
3
Network administrators can access the
IP-DSU
console port through the StarKeeper® II NMS.
Specific instructions for configuration of SAM, TY12 and MSM asynchronous ports are
available in the appropriate BNS-2000
Module Reference Guide
.
IP-DSU
specific
configuration guidelines are as follows:
Configure SAM, TY12 or MSM console connections as 9600 bps with 8 bits and no
parity, and use a DCE type cable.
Configure SAM or MSM console connections as type “host” and as a “pap” (permanently
active port).
Configure TY12 console connections as type “console”.
See Section 10 for wiring diagrams for special console cabling.
3
Console cables required for connections to TY12 and MSM modules, Modems,
SAM64/504 Multiplexors,
4000
, PCs, or terminals are available.
