I P - D S U U s e r ’ s M a n u a l
02/02/08
32
4.22 Console Timeout
Syntax: timeout [OFF | <Number of Minutes>]
The
IP-DSU
console uses a three-wire interface (RD, TD, GND), and the lead state of
other signals is not relevant. This would imply that the only way to change the state of
the console is to explicitly log in or log out, or via a reboot or reset, which forces the
console to be logged out.
For those users that wish the console to automatically log off after a period of inactivity,
there is the console timer. The console timer defaults to the disabled condition and may
be activated by the timeout command.
The command is only visible when the console is logged in. The <Number of Minutes>
must be between 1 and 255 inclusive. When the module determines a period of inactivity
of the specified time, it shall automatically log off the console. An INFO level alarm is
issued at that time.
4.23 ADMINISTER SECURITY BANNER
Syntax: banner [clear] [L#=”Line # Message”]
The
banner
command is only visible when the unit is logged. It is used to administer the
security banner. The default is a NULL banner. If a security banner is configured, it is
displayed at each user login. The
clear
option is a shortcut to erase the entire message.
