Datamax A-Class Mark II, Руководство оператора

Страница: 157 / 164

A-Class 147
Appendix G
Ribbon Saver Overview
With the Ribbon Saver option, the printer can conserve ribbon use in blank label areas. Depending
upon the label format, when more than .25 inches (6.4 mm) of ribbon can be saved in no-print
areas, the printhead lifts off the platen and a brake stops ribbon motion, while the assist rollers
continue to advance media. At about .25 inches before the next line of print, the brake releases as
the printhead is lowered to resume printing. Additional parameters and features regarding
operation include the following considerations:

The amount white space passed before the ribbon saver actuates is determined by the media
travel speed. For example, at 2 IPS there must be at least .65 inches (16.5 mm) of white
space, while at 8 IPS the length increases to 1.2 inches (30.5 mm) before engagement.

Ribbon savings become more significant as the label white space gets larger.

Following a Top of Form, Out of Stock, Position, Ribbon or Head Lift Fault, ribbon
saving will not occur during the first two inches (51 mm) after restart.

The ribbon saver will actuate up to twenty times per label.

The menu can be used for control (see Section 4.2.3).

Functional tests can be performed (see Section 4.2.6).

Throughput remains unaffected by operation. At faster speeds, however, a light horizontal mark
(produced as the moving label contacts the stationary ribbon) may appear across the label. To
minimize this contact mark use a slightly harder wax or wax/resin formulation of ribbon or slow
the print speed.