Datamax A-Class Mark II, Руководство оператора

Страница: 46 / 164

36 A-Class
Print Control (continued)
Menu Item Details
PRESENT DISTANCE
Sets the label stop position, where:
(0 – 4.00 in.)

AUTO 0.00
Is the label output distance. The default setting
(Auto) configures this distance according to the
positioning requirements of the attached device
(e.g., tear bar, cutter, etc).
 When set to 0.01 in., NONE is assumed; a
zero (0) positioning value will be used.
TOF PRECEDENCE Allows an override of label format data when the
form length is exceeded, where:

DISABLED Prints labels formats without TOF truncating.
ENABLED
Ends the label at the next TOF, truncating any
print data that extends past this mark.
CUSTOM ADJUSTMENTS
Allows slight, printer-specific adjustments, where:
DARKNESS

32 (1 – 64)
Controls the printhead strobe time (see HEAT) to
fine-tune the solid areas of an image.
CONTRAST

32 (1 – 64)
Fine-tunes the gray areas of an image.
ROW ADJUST

0000 (
–
XXX – XXXX
DOTS)
Shifts the vertical SOP position to fine-tune ROW
OFFSET; see Appendix B.
 If shifting in the negative direction, modify
PRESENT ADJUST (below) by the same
amount.
COLUMN ADJUST

000 (
–
XXX – XXX DOTS)
Shifts both the horizontal SOP position and the
LABEL WIDTH termination point to the right to
fine-tune COLUMN OFFSET; see Appendix B.
PRESENT ADJUST

000 (
–
XXX – XXXX DOTS)
Adjusts the label stopping position to fine-tune
PRESENT DISTANCE; see Appendix B.