Datalogic SG EASY One, Инструкция по эксплуатации

Страница: 24 / 153

2-14
Specification of configuration switches
(1) Logic switch
The logic switch is an 8-digit DIP switch for use in logic configuration. When one of 8 digits is
selected, the corresponding logic in the SG-ONE is activated. See “Chapter 5 Logic” for further
information of each logic. The upper position of each digit is the ON state.
Multiple switches
must not be selected.
(2) Timer switch
The timer switch is an 8-digit DIP switch for use in OFF-delay timer value configuration. When
one of 8 digits is selected, the delay time at shut-off operation is activated. The upper position of
each digit is ON state.
Multiple switches must not be selected.
Switch (Indication) Descriptions
0 1 No OFF-delay (safety outputs shut OFF immediately)
.1 2 OFF-delay timer 0.1s
.5 3 OFF-delay timer 0.5s
1 4 OFF-delay timer 1s
2 5 OFF-delay timer 2s
5 6 OFF-delay timer 5s
15 7 OFF-delay timer 15s
30 8 OFF-delay timer 30s
(3) Enter button
The enter button is used to activate the configuration of logic and timer value. Error LED will
blink for 1 to 5 seconds after pressing the enter button. Releasing the button during blinking
activates the setting. The blinking LED becomes ON if the button is pressed for more than 5
seconds, and the setting becomes invalid even after the button is released.
Caution
For setting the swithes and enter button, use the configuration tool supplied with the SG-ONE.
(1) (2)
(1) Logic switch
(2) Timer switch
(3) Enter button
(3)
LOGIC No. TIMER (S)
ENTER
0 .1 .5 1 2 5 15 30 1 2 3 4 5 6 7 8