DataComm V.34 PL, Руководство по эксплуатации

Страница: 25 / 56

060R115-000 DataComm V.34 PL Modem 3-1
Issue 1 Installation and Operation
Chapter 3:
Operation
Overview
This Chapter describes how to operate and configure the DataComm V.34 PL modem by means of
the modem's front panel push buttons (displayed in
Red throughout this chapter) and display.
The DataComm V.34 PL front panel, illustrated in Table 3-1 , includes 6 push buttons for
controlling the modem, 11 status LEDs and a 4-character display screen. Table 3-1 describes the
front panel controls and Table 3-2 describes the front panel indicators (the LEDs). The screen
displays the status of the modem and, with the push buttons, allows you to perform configuration
and testing.
Figure 3-1 Front Panel
Table 3-1 Front Panel Controls
Key Function
AL Starts/stops CCITT V.54 Loop 3 (Local Loop or ANALOOP).
Can be used before ST for CCITT V.54 Loop 3 with Self-Test (Local Loop Self-Test or ANALOOP
Self-Test).
ST Starts End-to-End Self-Test. (Use AL, RDL or DL to stop the test.)
Can be used after AL for CCITT V.54 Loop 3 with Self-Test.
Can be used after RDL for CCITT V.54 Loop 2 with Self-Test.
ADV Advances the display to the next configuration selection. See “Front Panel Configuration Procedure
Summary” on page 4.
RDL Starts/stops CCITT V.54 Loop 2 (Remote Digital Loopback).
Can be used before ST for CCITT V.54 Loop 2 with Self-Test (Remote Digital Loopback Self-Test).
DL Starts/stops CCITT V.54 Loop 2 (Digital Loopback).
SEL Displays current configuration. Sets the current configuration then advances to the next selection.
See “Front Panel Configuration Procedure Summary” on page 4.
RST Saves the changed options to the previously selected User Profile, and provides the Idle/On-Line
function.
V.34 PL
TR SD RD MR RS CS CO GD TM ALM OH
AL ST RDL DL SEL RST
ADV