![background image](http://html1.mh-extra.com/html/kddi/speed-u01/speed-u01_notes-on-usage_659790001.webp)
Follow the instructions of each medical facility for the use of the product on their premises. Failure to do so may affect
electronic equipment and electronic medical equipment.
The product sometimes affects high-precision electronic devices. So, turn it off near such devices. (Examples of
electronic devices that might be affected by the product include cardiac pacemakers, hearing aids, other electronic
medical devices, fire alarms, and automatic doors. If you are using an electronic medical device, contact the device
manufacturer or retailer for information about the possible affect of radio waves.)
When using the product near an implanted pacemaker, implanted cardioverter-defibrillator or other electronic medical
device, radio waves might affect these units and devices. So, please observe the following.
1. Those with an implanted pacemaker or implanted cardioverter-defibrillator should carry or use the product at least
15cm away from the pacemaker or cardioverter-defibrillator.
2. Do not use the product off when it may be difficult to keep at least 15cm away such as in a situation you cannot
move freely, since there may be people with a cardiac pacemaker or implanted cardioverter-defibrillator nearby.
3. When a medical institution has laid down designated areas where use of the product is prohibited or is not
allowed to be brought in, abide by the instructions of that medical institution.
4. When using electronic medical devices other than an implanted pacemaker and implanted cardioverter-
defibrillator outside a medical institution (e.g. home medical treatment), check individually with the manufacturer
of the electronic medical device regarding the influence of radio waves.
CAUTION
Be sure to read the following cautions before use.
Use of the product in an automobile sometimes affects on-vehicle electronic devices, though this rarely happens. If
this happens, stop use since this may impair safe travel.
If you feel any abnormality with your skin, immediately consult a dermatologist. Itching, rashes, eczema, etc.
sometimes occurs depending on your physical constitution and condition. The materials of parts used on the
product are as follows.
■
Speed USB STICK
Part
Material <Surface treatment>
Exterior case (Front)
PC+ABS <Coating>
Exterior case (Side)
PC+ 9% GF <Coating>
Exterior case (Metal part)
Beryllium copper
Back cover
PC+ABS <Coating>
Lamp cover
PC
Label
3M7815
USB connector
Stainless SUS304
USB connector exterior case
PC+ABS <Coating>
Screw label
PET/PC + TESA 4965
■
USB extension cable (Sample)
Part
Material <Surface
treatment>
Body part
PVC
USB connector
Copper alloy <Copper
plating>
Do not allow liquids, metal objects, burnable items, and other foreign matter to get inside the USB connector. Doing
so might cause fire, electric shock, a fault or injury.
Do not put the product directly on sand at a beach, etc. Sand or other small particles might get inside the product
causing overheating or a fault.
When using the product for data communication, be careful not to keep the product in direct contact with your skin
for a prolonged period, or not to cover the product with paper, cloth, bedding, etc. The main unit might get hot,
causing fire, injure, burns or a fault.
Be careful not to catch your finger in the product when raising the USB connector. It may cause an injury.
■
au Micro IC Card (LTE)
WARNING
Be sure to read the following warnings before use.
Do not put the au Micro IC Card (LTE) in a cooking apparatus such as a microwave oven or a pressure vessel. Doing
so might cause melting, overheating, fuming, loss of data or a fault.
CAUTION
Be sure to read the following cautions before use.
Be careful when attaching/removing the au Micro IC Card (LTE). Doing so might injure your hands or fingers.
Use only the devices specified by the Company to insert the au Micro IC Card (LTE) in. Using a device not specified by
the Company might cause loss of data or a fault.
For the specified devices, contact an au shop or Customer Service Center.
Do not disassemble or modify the au Micro IC Card (LTE). Doing so might cause loss of data or a fault.
Do not use or leave the au Micro IC Card (LTE) in hot places such as by the fire or a heater. Doing so might cause
melting, overheating, fuming, loss of data or a fault.
Do not throw the au Micro IC Card (LTE) into a fire or heat it. Doing so might cause melting, overheating, fuming, loss
of data or a fault.
Do not touch the IC (metal) part of the au Micro IC Card (LTE) or short-circuit it. Doing so might cause loss of data or
a fault.
Do not drop the au Micro IC Card (LTE) or subject it to strong impact. Doing so might cause a fault.
Do not fold, bend or place a heavy object on the au Micro IC Card (LTE). Doing so might cause a fault.
Do not wet the au Micro IC Card (LTE). Doing so might cause a fault.
Do not scratch the IC (metal) part of the au Micro IC Card (LTE). Doing so might cause a fault.
Do not store the au Micro IC Card (LTE) in dusty places. Doing so might cause a fault.
Do not store the au Micro IC Card (LTE) in places exposed to direct sunlight or hot and humid places. Doing so
might cause a fault.
Store the au Micro IC Card (LTE) out of reach of small children. Failure to do so might cause injury, etc. if they
accidentally swallow and choke on it.
Handling precautions
These precautions are provided to ensure that performance can be fully demonstrated. Thoroughly read these precautions to
ensure correct use.
■
Precautions common to the main unit, au Micro IC Card (LTE) and USB extension cable
(Sample)
●
Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or place
a heavy object on the product in a bag. Sitting on the product in your pocket might damage the internal circuit board
resulting in a malfunction.
Keeping the product connected to a PC might damage the connector resulting in a malfunction. Such damage and
malfunction are not covered by the warranty, even if there is no external damage.
●
Do not use the product in extremely hot, cold or humid places. (Use within an ambient temperature range of 5°C to 35°C
and humidity range of 35% to 85%.)
●
Do not use in places subject to lots of dust or vibration.
●
Clean the connection terminals with dry cotton swabs, etc. every now and then. Soiled terminals might cause poor
connection. Do not exert a strong force to clean the connection terminals to prevent deformation.
●
Clean the product with a dry soft cloth (such as the type used for eyeglasses). Wiping the product using alcohol, thinner,
benzine, detergent, etc. might erase the printing on the outer casing or cause discoloration.
●
Use as far away as possible from land-line phones, TVs and radios. Use nearby might affect them.
●
The product may become warm while communicating, depending on the situation, but this is not abnormal.
●
When the product is used by a child, parents or guardians should thoroughly read the “Instruction Manual” and teach the
child how to use it.
■
Main unit
●
Do not remove the stickers printed with the IMEI that can be seen when the back cover is removed. These stickers prove
that the product you are using complies with the Wireless Telegraphy Act and Telecommunications Operations Act.
●
Never use the modified product. Use of a modified device violates the Radio Law.
●
Do not remove the stickers printed with the "Technical Conformity Mark
" that can be seen when the back cover is
removed. These stickers prove that the product and the communication module you are using complies with the Wireless
Telegraphy Act and Telecommunications Operations Act.
●
To prevent unlawful modification, the product has been designed so that it cannot be easily disassembled. Modifying the
product is prohibited by the Radio Law.
●
Contents saved in this product might be altered or lost in an accident, fault, repair or mishandling. Be sure to keep a copy of important
contents. Note that Company assumes no responsibility for any damages or lost profits resulting from altered or lost contents.
●
Take care not to inconvenience people around you when you use the product in a public place.
●
Take care not to place magnetized items such as magnetic cards, speakers and TV sets near the product, as it might
cause malfunction.
Putting a strong magnetism close to the product might cause false operation.
●
When suddenly brought into a warm place from a cold place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when used under conditions such as this, the humidity might cause
corrosion or a fault.
●
When connecting the USB connector of the product to a PC or the USB extension cable (Sample), make sure that the USB
port or connector of the USB extension cable (Sample) is horizontal with the USB connector.
●
Note that applying unnecessary force with the USB connector of the product connected to a PC or the USB extension
cable (Sample) might cause damage.
●
Do not discard the product together with regular trash. Please cooperate in the collection of the product when it is no longer
needed to protect the environment and effectively use resources. Old products are collected at au shops and other places.
■
au Micro IC Card (LTE)
●
The au Micro IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense.
When malfunction is suspected, or in case of theft or loss, contact an au shop or PiPit.
●
Do not forcibly remove or insert the au Micro IC Card (LTE). Be careful not to exert excessive force when inserting the
card into the product.
●
You are responsible for any damage caused by inserting your au Micro IC Card (LTE) into some other IC card reader, etc.
●
Keep the IC (metal) part of your au Micro IC Card (LTE) clean. For cleaning the au Micro IC Card (LTE), wipe it with a dry,
soft cloth (such as for cleaning eyeglasses).
●
Do not put stickers, etc. on the au Micro IC Card (LTE).
●
Do not insert IC Card with a conversion adapter. Doing so may cause a fault.
●
Insert only an au Micro IC Card (LTE) into the au Micro IC Card slot on the product.
Notes on usage
・
As an instruction manual of this product, refer to the supplied “Quick start guide”, “Notes on usage” (this guide), or “
取扱説明書 詳細版
(Full
Instruction Manual)” (Japanese) available on the au homepage. In this manual, “Instruction Manual” includes “Quick Start Guide” (this manual), “Notes
on usage”, and “
取扱説明書 詳細版
(Full Instruction Manual)” (Japanese).
・
All of the indicated amounts exclude tax unless otherwise specified.
Exemptions
•
The Company is not liable for any damages arising from earthquakes, lighting, storms, floods or other natural disasters, as
well as fires, actions by third parties, other accidents, intentional or mistaken misoperation by the customer, or use under
other unusual conditions outside the responsibility of the Company.
•
The Company is not liable for any incidental damages (change/disappearance of described content, loss of business
income, disruption of business, etc.) arising from use of or inability to use the product.
•
The Company is not liable for any damages arising from failure to observe described content of the "Instruction Manual".
•
The Company is not liable for any damages arising for example, from malfunction caused by combination with connected
devices or software not related to the Company.
•
Settings etc. may sometimes be altered or lost due to faults, repair or other mishandling of the product. The Company is not
liable for any damage or lost due to faults, repair or other mishandling of the product.
•
It is recommended you keep a copy of important data on your PC's hard disk Whatever the cause of the defect or
malfunction may be, the Company assumes no responsibility for alteration or loss of saved data.
•
The product is used under WiMAX 2+ network environment; however, UQ Communications Inc. is not liable for quality of the
product etc.
* “The Company” as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION·OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD
◎
Reproduction of the content of this manual in part or in whole is prohibited.
◎
The content of this manual is subject to change without notice.
◎
Every effort has been made in the preparation of this manual. Should you notice any unclear points, omissions, etc., feel free to contact us.
Safety Precautions (Observe Strictly)
■
Before using this product, thoroughly read these “safety precautions” for proper use. After reading, store the precautions in
a safe place.
●
These “Safety Precautions” describe instructions that should be observed to prevent damage to property or injury to the
customer or others using the product.
●
These instructions are divided into the following categories.
■
Explanation of indications used in this manual
This symbol indicates “the potential and imminent danger of death or serious injury
(*1)
to a
person.”
This symbol indicates “the possibility of death or serious injury
(*1)
to a person.”
This symbol indicates “the possibility of personal minor injury
(*2)
to a person or physical
damage
(*3)
.”
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones, injuries
with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long
term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital
admission for treatment or long-term hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or pets.
■
Explanation of graphic symbols used in this manual
Indicates an action that is not allowed.
Indicates that use in a place where the product is likely to
get wet or allowing the product to get wet is not allowed.
Indicates that disassembly is not allowed.
Indicates an action that must be done.
Indicates that handling with wet hands is not allowed.
■
Precautions Common to the Main unit, au Micro IC Card (LTE), USB extension cable (Sample)
DANGER
Be sure to read the following hazards before use.
Be sure to use only the specified peripheral devices. Use of other peripheral devices might cause overheating,
ignition, rupture or fault.
Do not use, store or leave the product in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight,
in a car in the hot sun). Doing so might cause ignition, rupture, fault, fire or injury.
Before entering an area where flammable gas is generated such as a gas station, be sure to remove the product
from a PC and power off the PC. Failure to do so might cause the gas to catch fire.
Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so might cause
ignition, rupture, fault, fire or injury.
Do not throw the product into a fire or heat it. Doing so might cause ignition, rupture or fire.
Do not short-circuit the connection terminals. Do not allow conductive foreign objects (metal fragments, pencil leads,
etc.) to come into contact with or get inside the connection terminals. Doing so might cause fire, burns, a fault due to
heat generation.
When using a metal accessory etc., take sure not to allow the metal part come in contact with the connection
terminals. Doing so might cause electric shock, ignition, injury or a fault.
The customer is not allowed to disassemble, modify or repair the product. Doing so might cause a fault, ignition,
electric shock, or injury. The Company is not liable even in the event of any nonconformities arising on the product or
PC as a result of modification, etc. Modification of the product is in violation of the Wireless Telegraphy Act.
Do not damage, modify, twist, pull or place a heavy object on the USB extension cable (Sample). Do not use a
damaged USB extension cable (Sample). Doing so might cause an electric shock, short circuit or fire.
WARNING
Be sure to read the following warnings before use.
Do not drop or subject to strong impact, such as dropping and throwing. Doing so might cause rupture, overheating,
ignition or a fault.
Do not use outside when you can hear thunder. Doing so might risk lightning strikes and electric shock.
Do not let your hands, fingers and other parts of the body touch the connection terminals. Doing so might cause
electric shock, injury or a fault.
If the product is damaged because it is dropped or something, and the internal parts are exposed, do not touch the
exposed parts with your hands. Doing so might cause electric shock or injury from damaged parts. Contact an au
shop or Keitai Guarantee Service Center.
Do not splash with water or other liquids. Also, never use in places subject to direct splashing with water or pet urine,
etc. or in humid places such as bath areas, or use with wet hands. Doing so might cause electric shock or fault from
short-circuiting or corrosion of electronic circuits. In the event that the product is splashed with liquid, immediately
remove the product from a PC. Faults caused by wetting with water or humidity are not covered by the warranty and
charges will be incurred for repair.
Do not operate the product while driving an automobile or motorized bicycle, riding a bicycle or walking. Doing so
may compromise traffic safety and cause an accident.
Do not leave in places within the reach of small children. Small children might swallow small parts, etc. by mistake
and choke on them, or might drop them by mistake and cause accidents or injury.
CAUTION
Be sure to read the following cautions before use.
Do not store the product in places subject to direct sunlight (e.g. in automobiles), places that get hot, places that get
extremely cold, and in humid or dusty places. Doing so might cause overheating, ignition, deformation or a fault.
Do not leave on unstable places such as rocky stands or tilting surfaces. Dropping the product may cause injury or
damage. Also, pay sufficient attention to impact, etc.
Do not cover or wrap the product with bedding, etc. while using the product. Doing so might cause a fire, fault or
injury.
Do not touch the main unit for a long time while power is being supplied from an external source. Doing so might
cause low-temperature burns.
The product may become hot by prolonged use especially in high-temperature environment. Be careful when using
the product touching your skin for a long time, as it might cause low-temperature burns.
Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause a fault
or loss of internal data.
Do not leave or store with the back cover removed from the main unit. Doing so might allow dust or other foreign
objects to get inside and cause a fault.
Do not use if there is smoke, abnormal odor or noise, excessive overheating, or other abnormalities. If an abnormality
occurs, remove the product from a PC, make sure that the product is not overheating and contact an au shop or
Keitai Guarantee Service Center. Also, if you have dropped or damaged the product, do not continue to use it in that
state, and contact an au shop or Keitai Guarantee Service Center.
When using an external device or other devices, insert/remove the connector straight to/from the terminal. Unless it's
correct, it may cause damage or a fault.
■
Main unit
WARNING
Be sure to read the following warnings before use.
Do not use the product while driving a car or riding a motorbike or bicycle. It may cause a traffic accident. Use of
the product while driving a car or motorbike is prohibited by law. Use of the product while riding a bicycle may be
punishable by some regulations.
Use of electric devices on board is restricted. Follow the instructions of each airline company.
Failure to do so may adversely affect on-board electronic equipment. Doing prohibited use of the electric devices in
an aircraft may be punishable by law.
DANGER
WARNING
CAUTION