DataComm V.34 PL, Руководство по эксплуатации

Страница: 34 / 56

Operation Operating Procedures
3-10 DataComm V.34 PL Modem 060R115-000
Installation and Operation Issue 1
End-to-End Self-Test
CCITT V.54 Loop 3 Local Loop)
CCITT V.54 Loop 3 with Self-Test (Local Loop Self-Test)
To start the test, press ST . The modem flashes the TM LED and displays
the test name while it is setting up the test, then lights the TM LED and
displays four digits of the error count (0000 to 9999). It indicates larger
numbers by lighting decimal point one and displaying the four least
significant digits of the actual count (for example, the actual error count
is 12345, but the modem displays 2.345). To stop the test, press
AL ,
RDL or DL .
Setup
Running
To start the test, press AL . The modem flashes the TM LED and displays
the test name while it is setting up the test, then lights the TM LED and
lights decimal point three while the test is running. To stop the test, press
AL , RDL or DL .
Setup
Running
To start the test, press AL then press ST . The modem flashes the TM
LED and displays the test names while it is setting up the test, then lights
the TM LED and displays four digits of the error count (0000 to 9999). It
indicates larger numbers by lighting decimal point one and displaying
the four least significant digits of the actual count (for example, the
actual error count is 12345, but the modem displays 2.345). To stop the
test, press
AL , RDL , or DL .
Setup AL
Setup ST
Running