DataComm V.34 PL, Руководство по эксплуатации

Страница: 42 / 56

Tests Remote Digital Loopback
4-6 DataComm V.34 PL Modem 060R115-000
Installation and Operation Issue 1
5. Enter data at the local DTE. Compare data
that was entered at the DTE with the data
that is looped back and displayed by the
DTE. If errors occur frequently, a problem
may exist in the local or remote modems,
local DTE, local DTE-to-modem
connection, or the communication line.
Refer to
Figure 4-1 , Fault Isolation
Sequence.
6. To end the test, press AL, RDL, or DL.
Note: CTS at the remote modem will drop low during the test.
Table 4-4 Remote Digital Loopback (Continued)
Step Front Panel