Maintaining the printer
4-13
User’s Guide for Select™ Platinum Series™ Printers
4
Press down on the green printhead cartridge latch to release the printhead (step 1
in Figure 4-13).
Figure 4-13: Printhead cartridge latch lever
5
Lift the printhead cartridge up and off the swing arm (step 2 in Figure 4-13).
6
Remove the printhead cables.
–
Push the black locking tabs to the side. Remove the gray connector of the
printhead data cable from the printhead cartridge (see Figure 4-14).
–
Pull firmly on the white connector of the printhead power cable to remove it
from the printhead cartridge. You can gently pull on the wires attached to the
plug if needed to remove the cable.
Figure 4-14: Printhead cables and connectors
7
Remove the ground cable connector from the ground tab of the swing arm by
pulling on the red sleeve (see Figure 4-15).
Power cable
Data cable
Ground cable
Содержание select series
