P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PAG E 7
IMPORTANT
Safety cut out devices must be included in the mains power supply in compliance with the
installation regulations in the country concerned.
• If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. lf it does
not fit your socket, the plug should be cut off from the mains lead, and an appropriate
plug fitted, as below.
WARNING
Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp
socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not
incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on
type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved
fuse to as 1362. In the event of losing the fuse cover, the plug must NOT be used until a
replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the
correct replacement fuse cover is that as marked on the base of the plug.
• If your appliance’s not fitted with a plug, please follow the instructions provided below:
WARNING!!
This appliance must be earthed.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
If the colour of the wires in the mains do not correspond with the coloured markings identifying
the terminals in your plug. Proceed as follows:
• The green and yellow wire must be connected to the terminal in the plug marked with the
letter E or the earth symbol or coloured green or green and yellow.
• The blue wire must be connected to the terminal marked with the letter “N”
or coloured black.
• The brown wire must be connected to the terminal marked with the letter “L”
or coloured red.
AUTOMATIC CUP TRAY LIGHT WARNING
When the appliance is on, the lights (near coffee spout) automatically illuminate the spout and
cup tray.
Important! Do not look at the lights directly or using an optical instrument.
