P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PAG E 1 0
Step 5: Extract this machine to the outside.
Open the coffee bean cover at add coffee
beans in container.
Step 7:
• Take out the tank and fill it with fresh
water, then insert in original position.
• Put this machine to back into the
Built-in cabinet and connect to the power.
Turn on main switch (A5) you can use
this machine.
• If the coffee maker is installed over a
warmer drawer (500W max.), use the
top surface of this as a reference to
position the rails.
• Fix the power cable with the clip to
avoid it tangling when the appliance is
inserted or extracted.
• The power cable must be long enough
to allow the appliance to be extracted
from the cabinet to fill the coffee beans
container.
• The appliance must be earthed in
compliance with legislation.
• Electrical connections must be
performed by a qualified electrician
in compliance with the manufacturer’s
instructions and legislation in force in the
country of installation.
Install 2 screws in each side.
Step 6: Open the tank cover on left side A11.
