P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PAG E 2 7
EMPTYING THE UNIT
When the machine has not been used for extended amounts of time or is required to be
transported to a different location the internal water can be purged from the machine if required:
1. When in “ready” state, Press the B8 button.
2. Select the “menu” and Press the B8 button.
3. Enter next menu, select “maintain” and Press the B8 button enter next menu.
4. Select “empty ready” and Press the B8 button.
5. The machine will now display “remove tank”.
6. After removing the tank press the B8 button. The machine will start the
emptying program, and screen display “emptying”.
7. Shortly after, the buzzer will run 3 times and the screen will become black, when this
happens “emptying” program is complete
The machine can now be reset for use as follows:
1. Fill water tank, plug in and switch on the machine.
2. The machine will automatically run the “system filling” program.
3. The screen display “open tap”.
4. Press the B8 button and select screen display “system filling”. The unit should now pump
water through the machine and water should exit out of the coffee spouts.
AUTOMATIC SHUT OFF
Once the time is set, you can also set the automatic turn off for this machine.
It is the same operation as “auto on”.
1. In
“ready” state, Press the B8 button, select the “auto off” and Press the B8 button.
2. You can select “30min”, “60min” or “90min” shut off.
3. Select the time you require and press the B8.
4. The machine is now set for automatic shut off.
