Danfoss VLT HVAC FC 100, Руководство по обслуживанию, Страница: 7 / 220

Contents | Figure
Figure 1.1: Exploded view D3 Frame size, D1 frame is similar. 1-5
Figure 1.2: Exploded view D4 frame size, D2 frame is similar. 1-6
Figure 1.3: Exploded view E2 frame size, E1 frame is similar. 1-7
Figure 2.1: Control Terminals 2-14
Figure 2.2: Control Terminals Electrical Diagram 2-18
Figure 3.1: Control Card Logic 3-1
Figure 3.2: Logic Section 3-2
Figure 3.3: Typical Power Section 3-4
Figure 3.4: Rectifier circuit 3-6
Figure 3.5: Intermediate section 3-8
Figure 3.6: Output Voltage and Current Waveforms 3-9
Figure 3.7: Inverter section 3-10
Figure 3.8: Brake option 3-11
Figure 5.1: Adjustable Frequency Drive Functionality Diagram 5-7
Figure 5.2: Ground Currents 5-8
Figure 5.3: Signal Conductor Currents 5-8
Figure 5.4: Alternate Signal Conductor Currents 5-9
Figure 5.5: Proper EMC Installation 5-11
Figure 6.1: Signal Test Board 6-2
Figure 6.2: SCR Shorting Plug 6-3
Figure 6.3: Two-Pin 6-3
Figure 6.4: Three-Pin 6-3
Figure 6.5: Power Card, and Mounting Plate 6-4
Figure 6.6: Soft Charge Card Fuses 6-5
Figure 6.7: Soft Charge Card Connectors 6-8
Figure 6.8: Soft Charge Card Fuse Location 6-9
Figure 6.9: Soft Charge Card Connectors 6-11
Figure 6.10: Fan Transformer and Fuse Location 6-17
Figure 6.11: Fan and DC Bus Fuse Locations 6-19
Figure 6.12: Drive Power Terminals ( 6-20
Figure 6.13: Normal AC Input Voltage Waveform 6-26
Figure 6.14: AC Input Current Waveform with Diode Bridge 6-26
Figure 6.15: Input Current Waveform with Phase Loss. 6-27
Figure 6.16: SCR Gate Signal 6-28
Figure 6.17: Gate Drive Card Test Connectors 6-31
Contents
High Power Service Manual for VLT
®
FC Series
Adjustable Frequency Drives
MG.90.L1.22 - VLT ® is a registered Danfoss trademark