![background image](http://html1.mh-extra.com/html/danfoss/vlt-hvac-fc-100/vlt-hvac-fc-100_service-manual_3491926163.webp)
Figure 8.1: Control Card Access
380–480/500V: Yellow tape on the main SMPS
transformer in the upper right corner.
525–690V: White tape on the main SMPS
transformer in the upper right corner.
1
Local control panel (LCP) (Step 2)
8
Power card PCA3
2
LCPcradle (Step 3)
9
MK102 ring lug connection
3
C-option (if installed)
10
DC bus fuse
4
Mounting screws (Step 5)
11
Control card mounting plate
5
Control assembly support bracket
12
Control card terminal block
6
Attaching hardware
13
Control card (under LCP)
7
Power card mounting plate
8.2.2 Control Assembly Support Bracket
1.
Remove the control card mounting plate in accordance with procedure.
2.
Remove the 6 mounting nuts (10 mm), see Figure 8-1.
3.
Remove the control assembly support bracket.
Reinstall in reverse order of this procedure. Tighten the mounting screws to 4 Nm (35 in-lbs).
8 E-Frame Sizes Disassembly and Assembly
Instructions
High Power Service Manual for VLT
®
FC Series
Adjustable Frequency Drives
8-2
MG.90.L1.22 - VLT
®
is a registered Danfoss trademark
8
Содержание VLT HVAC FC 100
Страница 219: ......
Страница 220: ...Rev 2008 09 01 www danfoss com drives 130R0438 MG90L122 MG90L122 High Power Service Manual MG90L122...