![background image](http://html1.mh-extra.com/html/danfoss/isave-40/isave-40_operation-manual_3540938057.webp)
Operation guide | iSave 40
57
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
2.
Unscrew 10 bolts in the adapter flange
between booster pump and pressure
exchanger. Leave the 2 upper bolts
tighted.
3.
Unscrew the 2 upper bolts.
1.
Apply a light lifting force on the
pressure exchanger and disconnect the
support bracket between the pressure
exchanger and base plate.
Tools needed to disassemble the iSave:
Parts included in tool set (180F4112):
•
5 mm Hex socket
•
6 mm Hex socket
•
8 mm Hex socket
•
16 mm special ½” socket
•
1 M6 bolt and nut
•
Locking tool for shaft
•
Tool for shaft seal assenbly
•
Tool for retainer assembly
•
3 press bolt-set for valve plate assembly
•
M12 Lifting eye
•
Lifting adapter for vertical disassembling of
iSave
2.
Disconnect the iSave
from electric motor
4.
Carefully pull and lift the pressure
exchanger from the booster pump.
Parts not included in tool set:
•
2 screwdrivers
•
Torque wrench 10 - 60 Nm
To prevent cold welding, Danfoss recommend to
use thread lubricant for all screw threads for
installing the iSave (here after only referred to
as lubricate) and first tighten the screws by hand.
Содержание iSave 40
Страница 34: ...Operation guide iSave 40 34 180R9239 AQ299555093252en 001601 iSave 40 09 2022 iSave 40 Code no 180F7011...
Страница 53: ...Operating guide Energy recovery device iSave 40 Appendices hpp danfoss com...
Страница 96: ...M a n u a l Electric Motors Motor Manual hoyermotors com...
Страница 100: ...101 180R9379 AQ188686503004en 000801 PAH 2 12 5 07 2022...