![background image](http://html1.mh-extra.com/html/danfoss/isave-40/isave-40_operation-manual_3540938084.webp)
Operation guide | iSave 40
84
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
17. Install the screws and cross tighten
them to the torque specified in the
exploded view. Use the special tool when
using the torque wrench.
The shaft is normally not a wear part
and can only be changed by Danfoss.
1.
Assemble new back-up rings and
O-rings on the valve plates. Back-up
rings first.
2.
Lubricate the O-rings and back-up rings
with clean filtered water and position the
two valve plates into the rotor ends.
9.
Assembling the
cylinder barrol in
pressure exchanger
3.
Using the tools provided gently screw in
the valve plates.
4.
Check the distance between the two
valve plates and the cylinder barrel.
Adjust the distance if necessary.
O-ring
Back-up ring
Special tool
Содержание iSave 40
Страница 34: ...Operation guide iSave 40 34 180R9239 AQ299555093252en 001601 iSave 40 09 2022 iSave 40 Code no 180F7011...
Страница 53: ...Operating guide Energy recovery device iSave 40 Appendices hpp danfoss com...
Страница 96: ...M a n u a l Electric Motors Motor Manual hoyermotors com...
Страница 100: ...101 180R9379 AQ188686503004en 000801 PAH 2 12 5 07 2022...