Danfoss iSave 40, Руководство по эксплуатации

Страница: 5 / 101

Operation guide | iSave 40
5
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
2. Introduction 2.1 General
iSave is manufactured by Danfoss A/S, and is sold
and marketed by a net of authorised distributors
worldwide.
This manual contains the necessary instructions
for the installation, operation and service of the
iSave.
All personnel who are responsible for the
operation and maintenance of the iSave unit
must read and fully understand these instruc-
tions, especially the section “Safety” before:
• Transportation of the iSave unit.
• Lifting the unit.
• Installing the iSave unit on a frame.
• Connecting the iSave unit to the fluid system.
• Connecting the electric motor and instrumen-
tation.
• Commissioning the unit.
• Servicing the iSave unit, mechanic and electrics-
parts.
• Decommissioning the iSave unit.
Ensure that these instructions are always
readily available to all personnel concerned.
2.2 Target group
This manual is intended for use by personnel
with qualified training and experience in the
operation and maintenance of a Sea Water
Reverse Osmosis (SWRO) or Brackish Water
Reverse Osmosis (BWRO) system.
2.3 Symbols
Indicates something to be noted by the
reader
Indicates a situation which will or could
result in damage to the iSave and its
function
Indicates a situation which will or could
result in personal injury and/or damage to
the iSave
Electrical hazard - Indicates a high- voltage
warning
Safety glasses required
Hearing protection required
Safety shoes required
Safety helmet required
2.4 Manufacturer and customer service
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg, Denmark
Telephone: +45 7488 2222
Email: highpressurrepumps@danfoss.com
Homepage: www.hpp.danfoss.com
2.5 Country specific information
2.5.1 United Kingdom
UK importer:
Danfoss Ltd.
22 Wycombe End
HP9 1NB Beaconsfield
United Kingdom
2.6 Additional technical documents
Document name Content
Instruction:
Start and stop of the SWRO with iSave unit
Description of how to start and stop the iSave in
the preferred RO system set-up
Instruction:
Membrane cleaning of RO system with iSave
unit
Description of how to clean the membranes
in the preferred RO system set-up
Dimensional drawings Description of the dimensions of the iSave
iSave parts list Sectional drawings, parts list and spare part
numbers
Instruction:
iSave overload protection
Electrical wiring diagram on how to protect the
iSave against overload / mechanical overload
protection of the iSave
Instruction:
Hose assembly and installation
Guideline for hose assembly and installation
Service instructions:
Disassembling and assembling
Description of how to assemble and disassem-
ble the iSave
Operating and maintenance instructions:
Electric motor
Operating and maintenance instructions for the
standard electric motor, delivered from Danfoss