![background image](http://html1.mh-extra.com/html/danfoss/isave-40/isave-40_operation-manual_3540938065.webp)
Operation guide | iSave 40
65
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
4.
Basic inspection
1.
Inspect the vanes. Note the position of
the scratches and be extra observant at
these areas when inspecting the stator.
2.
Inspect the stator for scratches on the
wear surface. Use sandpaper grid 800 to
polish any rough areas. Only polish in
rotation direction.
3.
Inspect the side plate for cracks.
You don’t have to remove the side plate
if no visible cracks are found.
4.
If the rotor bearing surfaces has wear
grooves with a visible edge it should be
changed. Call Danfoss for
further support.
5.
Inspect the shaft seal. The rubber
should not have any wear marks.
If there are cracks or scratches on the
surface of the ceramic ring,
replacement is needed
6.
The ceramic rings should not have any
cracks or scratches.
Содержание iSave 40
Страница 34: ...Operation guide iSave 40 34 180R9239 AQ299555093252en 001601 iSave 40 09 2022 iSave 40 Code no 180F7011...
Страница 53: ...Operating guide Energy recovery device iSave 40 Appendices hpp danfoss com...
Страница 96: ...M a n u a l Electric Motors Motor Manual hoyermotors com...
Страница 100: ...101 180R9379 AQ188686503004en 000801 PAH 2 12 5 07 2022...