Danfoss D9h, Руководство по эксплуатации

Страница: 192 / 206

Term Definition
PELV Protective extra low voltage
PHF Passive harmonic filter
PID Proportional integral derivative
PLC Programmable logic controller
P/N Part number
PROM Programmable read-only memory
PS Power section
PTC Positive temperature coefficient
PWM Pulse width modulation
R
S
Stator resistance
RAM Random-access memory
RCD Residual current device
Regen Regenerative terminals
RFI Radio frequency interference
RMS Root means square (cyclically alternating electric current)
RPM Revolutions per minute
SCR Silicon-controlled rectifier
SMPS Switch mode power supply
S/N Serial number
STO Safe Torque Off
T
LIM
Torque limit
U
M,N
Nominal motor voltage
V Volt
VVC Voltage vector control
X
h
Motor main reactance
11.3 International/North American Default Parameter Settings
Setting parameter 0-03 Regional Settings to [0] International or [1] North America changes the default settings for some parameters.
Table 139: VLT
®
FC Series International/North American Default Parameter Settings
Parameter International default value North American default value
Parameter 0-03 Regional Settings
International North America
Parameter 0-71 Date Format
DD-MM-YYYY MM/DD/YYYY
Parameter 0-72 Time Format
24 h 12 h
AQ262139143212en-000301 / 130R0879 192 | Danfoss A/S © 2021.10
Appendix
VLT® AutomationDrive FC 302
Operating Guide