Danfoss D9h, Руководство по эксплуатации

Страница: 169 / 206

FC 302 N355 N400 N500
High overload=150% or 160% torque for a duration of 60 s.
Normal overload=110% torque for a duration of 60 s.
Typical shaft output at 550 V [kW] 315 355 355 400 400 450
Typical shaft output at 575 V [hp] 400 450 400 500 500 600
Typical shaft output at 690 V [kW] 355 450 400 500 500 560
Enclosure size
E5h E5h E5h
Output current (3-phase)
Continuous (at 550 V) [A] 395 470 429 523 523 596
Intermittent (60 s overload) (at 550 V) [A] 593 517 644 575 785 656
Continuous (at 575/690 V) [A] 380 450 410 500 500 570
Intermittent (60 s overload) (at 575/690 V) [A] 570 495 615 550 750 627
Continuous kVA (at 550 V) [kVA] 376 448 409 498 498 568
Continuous kVA (at 575 V) [kVA] 378 448 408 498 498 568
Continuous kVA (at 690 V) [kVA] 454 538 490 598 598 681
Maximum input current
Continuous (at 525 V) [A] 381 453 413 504 504 574
Continuous (at 575/690 V) [A] 366 434 395 482 482 549
Maximum number and size of cables per phase
- Mains [mm
2
(AWG)] 4x127 (4x250 mcm) 4x127 (4x250 mcm) 4x127 (4x250 mcm)
- Mains with disconnect [mm
2
(AWG)] 4x127 (4x250 mcm) 4x127 (4x250 mcm) 4x127 (4x250 mcm)
- Mains with fusible disconnect [mm
2
(AWG)] 4x127 (4x250 mcm) 4x127 (4x250 mcm) 4x127 (4x250 mcm)
- Mains with contactor [mm
2
(AWG)] 4x127 (4x250 mcm) 4x127 (4x250 mcm) 4x127 (4x250 mcm)
- Motor [mm
2
(AWG)] 4x127 (4x250 mcm) 4x127 (4x250 mcm) 4x127 (4x250 mcm)
Drive module power loss at 600 V [W]
(1)(2)(3)
4989 6062 5419 6879 6833 8076
Drive module power loss at 690 V [W]
(1)(2)(3)
4920 5939 5332 6715 6678 7852
Drive efficiency
(2)
0.98 0.98 0.98
Output frequency [Hz]
(4)
0–590 0–590 0–590
Heat sink overtemperature trip [°C (°F)] 110 (230) 110 (230) 110 (230)
Control card overtemperature trip [°C (°F)] 80 (176) 80 (176) 80 (176)
PHF overtemperature trip [°C (°F)] 150 (302) 150 (302) 150 (302)
AQ262139143212en-000301 / 130R0879 | 169 Danfoss A/S © 2021.10
Specifications
VLT® AutomationDrive FC 302
Operating Guide