Danaher Motion SuperDrive ACS24 Series, Руководство пользователя

Страница: 9 / 99

26.04.2005 Introduction
1.2.4 R
EPAIR
Repair and testing of the APS is available at Danaher Motion Stockholm AB.
The address is listed on page 99 .
When returning defective unit in North America, contact Danaher Motion Stockholm AB in
Sewickley and obtain a RMA (Returned Materials Authorization) number prior to returning the
defective unit. Indicate the RMA number on the shipping container and paper work that
accompanies the returned unit.
1.2.5 P
RODUCT WARRANTY
Refer to the sales agreement or contract under which the AC SuperDrive was purchased for a
complete statement of the product warranty.
1.3 P
RODUCT IDENTIFICATION
1.3.1 C
ONFIGURATIONS
The AC SuperDrive is manufactured in the following two configurations:
•
Convection cooled models (see Figure 1) employing a heat sink with cooling fins that transfer
heat to the surrounding air by convection.
•
Conduction cooled models (see Figure 1) with a flat heat sink and mounting surface that
transfers heat into the surrounding vehicle structure by conduction.
1.3.2 AC S
UPER
D
RIVE IDENTIFICATION LABEL
A label containing pertinent product identification information is affixed to the AC SuperDrive
cover next to the B+ terminal post. The product label fields relevant to product identification are
described below. For AC SuperDrive expressions, see
Table 1 . See Figure 1 for placement and
Figure 2 for a label appearance.
Figure 1. AC Superdrive with fins and flat Mounting Surface.
User's Guide 1.0 Item No.
89Y05120A
9